Bearings for short staple ring spinning
Contact roll assemblies AR
Texparts AR provide the necessary, reliable belt contact pressure to the spindle wharves. The modular design consists of leaf spring links with angle brackets and contact rolls with integrated bearing units. All AR contact roll assemblies are using the same integrated deep groove ball bearing unit. The modular design of the AR series allows the use of various pulleys with different diameters and heights to adapt the AR assemblies to standard and sectional tangential drive systems. AR Contact roll assemblies are offered for spindle gauges from 70 mm up to 90 mm. Also one-sided Texparts contact roll assemblies are available.
Advantages
- Modular design for all known tangential drive systems
- Robust integrated deep groove ball bearing unit with the highest loading capacity at smallest required space
- Steel pulleys with guide flange for an easy mounting of the belt
- Linear spring rate
- Energy saving
- Low noise level
- Less maintenance and long re-lubricating intervals
- Easy access from front side to relubricate the lubricating bore
- Highest angularity accuracy of the contact rolls for a perfect guiding of the drive belts
- Contact roll covered on both sides against fibre fly accumulation at rotating elements
Types
- AR 5024 for ring spinning machines with a belt width up to 16 mm at max
- AR 3528 for ring spinning machines with a belt width up to 20 mm at max
- AR 5047 for ring spinning machines with a belt width up to 40 mm at max
Tension pulleys SR
Texparts bearings SR are designed to function as guide pulleys as well as tensioners in tangential belt and tape drives. The user can choose the right SR types according to his special load case, his intended mounting option and his required space.
Characteristics
- High running precision
- Low noise level
- Simple, practical installation
- Low maintenance requirements
Types
- SR 28 for guiding the tangential belt
- SR 45 for guiding and tensioning the tape or the belt in spindle drives
- SR 5047 for guiding and tensioning the tape or the belt in spindle drive
Guide rollers FR
Texparts guide rollers FR are designed as guide rollers for belt drives as well as bearing units in gear mechanisms and pulleys. The combination of a ball bearing and a roller bearing enables the bearing units FR to manage extremely high radial forces. The guide rollers are universally usable and can be easily mounted due to the attached nut. The bearing units FR are not exclusively developed for the textile industry but can also be used in different general engineering applications.
Downloads
Find out more about our products. Here we provide you with all the relevant documents for download in PDF format.
Brochure bearing units
5.29 MB
Contact us
Should you have questions about our products or require additional guidance, kindly get in touch with your local contact person. As your partner, we pride ourselves in providing expert and swift support.
