Blowroom

The Autopluck 6 gantry bale plucker adopts cutting-edge design technology to address industry pain points in high production, multi-fibre compatibility and space efficiency, setting a new benchmark in plucking performance and operational stability.

• 3,500mm working width, 35%–55% less floor space; optional 3,000mm for site adaptability;
• Simultaneously grabs 5–7 bales with 30%-50% higher efficiency;
• "The lifting of the plucking arm is driven by a high-precision ACME screw rod for higher elevation accuracy and reliable self-locking safety;
• Dual-side drive for travel ensures smoother operation;
• "Equipped with φ300mm dual beaters: optimally designed in diameter and tooth count for smaller cotton bundle grabbing, higher production, gentler opening, and more uniform, smoother bale layer surface;
• Ω-shaped cover belt structure adapts to longer air ducts;
• Big data intelligent bale arrangement system;
• Capable of grabbing 4 material varieties, with AI-powered bale levelling and one-button startup;
• Dual-side LED indicator lights for clear fault alerts and startup warnings.

As the starting unit of blowroom lines, the round automatic plucker handles all cotton grades and man-made fibres up to 76 mm in length.

• Dual units can be installed in parallel for higher capacity;
• Low maintenance requirement;
• The Frames are available in 1.0 m, 1.2 m and 1.5 m heights for different bale sizes:
  ‑ JSB 002A/003A: 1 m, 1.2 m;
  ‑ JSB 002B/003B: 1.5 m;
• Inverter-controlled carriage ensures precise plucking. Photoelectric protection with auto-stop is available for the bale area, fitted as standard on CE-certified models;
• Beater length:
  JSB002 A – 1,618 mm;
  JSB003 A – 2,346 mm;

Installed between plucker and multi-mixer, the dual-axial flow opener delivers gentle fibre opening and effective fine dust and short fibre removal. It stabilises feeding pressure and prevents line blockages.

• Dual-beater dual-flow design splits material into two independent streams, each undergoing 7 cyclic beating cycles for highly efficient opening and cleaning.
• Compared with conventional monoaxial models, it delivers over 60% higher production with gentler material handling and reduced fibre breakage.
• Optimised anti-winding grid bars work with dust-cage dedusting to eliminate micro-dust and short fibres while stabilising cotton feeding.
• Beater and feeding fan adopt permanent magnet motors for lower energy use.
• Optional waste detection enables automatic grid bar adjustment and less manual intervention.

The Multi-mixer is suitable for mixing various fibres (up to fibre length 76mm) that require high mixing uniformity.

• The combination of airflow, laminated anddensity mixing results in an outstanding result.
• Uniform blending of diverse fibre clusters optimises fibre length and strength, ensuring premium carding sliver quality. This effectively reduces yarn breakage in the spinning process, delivering superior performance especially for blended yarns.

JSB 201 De-dusting Machine suits all cotton grades and serves as the final fine cleaning stage in blowroom lines, removing micro dust
from fully opened fibres. It is especially essential for rotor spinning and air-jet spinning, remarkably reducing yarn breakage caused by dusty
fibres and improving overall line efficiency.

• Working width: 1,600 mm;
• Production up to 1,500 kg/h;
• The inlet fan adopts stepless frequency conversion speed regulation to adapt flexibly to various raw materials and output
  requirements;
• Simple operation with zero fibre damage during de-dusting, preserving original fibre quality.

The Horizontal Feeder JSW 312 and the Weighting Opener JSW 301 can flexibly adopt various feeding modes such as automatic or manual. Accurate weighing according to the proportion, 2 to 6 different fibres can be blended at the same time with a blending accuracy of up to 1%.

• Visible and digital precise weighing.
• Blending of up to 6 raw materials.
• Blending accuracy up to 1%.
• Auto-taring and precise calibration.
• Auto-compensation with weighing accuracy up to 1%.
• Multi-formula storage for fast batch change.
• Easy cleaning and labour cost saving.
• Intelligent production management.

Sie können Ihre Saurer-Maschinen jetzt mit einem einzigen Programm verwalten. Senses bündelt und analysiert Produktions-, Qualitäts- und Leistungsdaten. Sicher und von überall.